If you're planning a kitchen renovation, accurate measurements are one of the best ways to avoid delays, unexpected costs and design revisions. The more details you provide upfront, the easier it is to create a cabinet layout and quote that fit your space.
At Koda Cabinetry, we use your measurements, photos, plans and project details to design cabinetry for your actual kitchen, not a rough estimate. Use this checklist to collect what we need before you request a quote or design help.
Prefer paper? Print our free measuring guide and fill it in as you go.
Before You Begin: Three Simple Steps
1. Decide what's staying
Make a quick list of what will remain in the kitchen:
Appliances
Windows and doors
Flooring
Plumbing locations
Lighting and electrical fixtures
Any part of the layout you want to keep
Even a possible change, like moving the sink or replacing the refrigerator, affects the cabinet design, so note it.
2. Clear the walls
Move anything blocking walls, corners, outlets, trim, toe-kick areas or appliance openings. Clear access makes your measurements more accurate and helps you spot details you might otherwise miss.
3. Gather your tools
Tape measure
Pencil and notepad (or our printable guide)
Painter's tape
Smartphone or camera
Laser measure, if you have one
A standard tape measure works perfectly well for most kitchens.
How to Measure: The Basics
Measure in inches, to the nearest 1/8 inch. Don't round.
Start in one corner and work around the room clockwise, so nothing gets skipped.
Measure everything twice. If the two numbers don't match, measure a third time.
Sketch the room first, then write each measurement on the sketch where it belongs. It doesn't need to be neat, just clear.
Essential Measurements for Kitchen Cabinets
1. Wall dimensions
Measure the full length of every wall that may get cabinets. Record:
Overall wall length, corner to corner
Partial wall sections
Bump-outs, columns, chases or recessed areas
Changes in wall depth
Any spot where the wall isn't straight
Measure each wall at three heights: along the floor, at countertop height (about 36 inches) and at upper-cabinet height (about 54 inches). Walls are rarely perfectly straight, especially in older homes. Write down all three, and we'll plan around the smallest.
2. Ceiling height and soffits
Measure floor to ceiling in several spots. Also note:
Soffit height and depth
Where soffits begin and end
Beams or bulkheads
Sloped or vaulted ceilings
Ceiling drops or other obstructions
These details decide whether cabinets can go to the ceiling, how much crown molding you'll need and whether special trim is required.
3. Windows and doors
For every window and door, record:
Width and height of the opening, including trim
Distance from the nearest corner to the edge of the trim
Window sill height from the floor
Trim depth and width
Which way each door swings
Deep trim can affect cabinet doors, fillers and clearances, so include it.
4. Sink, plumbing and gas
Distance from the nearest corner to the center of the sink drain
Where the water supply lines come in, and their height from the floor
Gas line location, and whether it comes through the wall or the floor
The sink measurement is the one people most often get wrong, and it sets up the whole sink wall.
5. Walkways and clearances
Open space matters as much as walls. Record:
Distance between the perimeter cabinets and the island
Space available for a new island
Narrow or tight walkways
Clearance around doors and appliances
Door swings for the refrigerator, pantry and nearby rooms
These help prevent crowded work areas and doors, drawers and appliances that bump into each other.
Appliance Information to Include
Appliances affect cabinet sizes, panels, fillers and ventilation. Include specs for anything you're keeping or planning to buy:
Range or cooktop width
Range type: freestanding, slide-in or built-in
Refrigerator width, height and depth
Refrigerator door swing and hinge side
Dishwasher width
Microwave type and location
Range hood size and location
Model numbers, if you have them
A counter-depth refrigerator, drawer microwave or 36-inch range can change the whole layout. Haven't bought appliances yet? Include the sizes you're considering, and choose them before your design is final.
Helpful tip: Photograph each appliance area, including nearby outlets, plumbing, gas lines, ductwork and vents.
Details That Prevent Design Changes
Some important details don't need a tape measure. Note:
Electrical outlets and switches
Dedicated appliance circuits
Under-cabinet wiring
Baseboard heaters, radiators or floor vents
HVAC registers and returns
Mini-splits or other wall-mounted equipment
Existing flooring, and whether it stays
New flooring going in before or after the cabinets
Wall damage or uneven floors
Storage problems you want to solve
List your priorities too: more drawers, a better pantry, a trash and recycling pull-out, a more useful corner cabinet.
Kitchen Photo Checklist
Clear photos make quoting and design much faster. Take:
Straight-on photos of each wall
Angled photos of every corner
Wide shots of the whole room
Close-ups of the plumbing under the sink
Outlets, switches and electrical boxes
Vents, radiators and baseboard heat
The ceiling and any soffits above the cabinets
Appliance openings and the walls around them
Uneven floors, damaged walls or out-of-square spots
Trim, molding and flooring transitions
A short video walkthrough also helps show how the kitchen connects to nearby rooms and how people move through it.
Quick Checklist
Before you send your project to Koda Cabinetry, make sure you have:
Measurements for every cabinet wall, at three heights
Ceiling heights from several spots
Soffit, beam and bulkhead sizes
Window and door sizes, including trim
Distances from openings to nearby corners
Window sill heights and trim depths
Corner-to-sink-drain measurement
Island size and walkway clearances
Appliance sizes and model numbers
Door swing directions
Plumbing and gas locations
Outlets, switches, vents and heating
Flooring plans
Photos of walls, corners, appliances and utilities
Your storage needs and design priorities
Your Measurements and Your Order
Your measurements are for quoting and design. Before your cabinet order is placed, you'll have the chance to review and confirm your measurements. If you're local to the Denver area, we can also send someone out to confirm them before your order is finalized.
Ready for a Cabinet Quote?
Send us your measurements, photos and appliance details, and we'll put together a free cabinet quote that fits your kitchen. You can attach photos to the form or email them to kodacabinetry@gmail.com.